Contact Us
Thought Leadership

Deploy an Amazon Aurora MySQL DB Based on Best Practices Using AWS CloudFormation

November 25, 2020

Introduction

This article describes how to deploy the infrastructure needed for an Amazon Aurora MySQL DB Cluster with 2 DB instances. All the infrastructure has been made from an Amazon CloudFormation template based on the network isolation using Amazon VPC, private networks, a bastion host, and security groups. In addition, there is a section that shows the steps to connect with the Aurora MySQL DB through SSH tunnel using the bastion instance as a proxy.

Objective

Create an Amazon Aurora MySQL DB based on several AWS security and high availability best practices using AWS CloudFormation.

Pre-requisite

  • You will need to get an account at AWS Console.
  • Basic knowledge of AWS services
  • Create an EC2 key pair using the Amazon EC2 console
  • Select an AMI ID for the bastion host

Overview

Below, the solution diagram is shown, which will be working throughout the article.

The following best practices apply in this article:

  • Network ACLs with default rules to the private and public subnets, which can be used as firewalls to control inbound and outbound traffic at the subnet level
  • Independent routing tables for the private and public subnets
  • The setup of a security group associated with the Amazon Linux bastion host that allows access only to known CIDR scopes and ports for ingress
  • Multi-AZ Aurora DB cluster with a primary instance and an Aurora replica in two separate Availability Zones allowing high availability and in case the primary instance becomes unavailable Aurora automatically fails over to a Replica
  • Aurora DB cluster is in a private subnet according to AWS security best practice. To access the DB cluster, we will use the instance bastion host created in the CloudFormation template
  • The setup of a security group associated with the Aurora DB Cluster that allows access only to known CIDR scopes and port for ingress

STEPS TO CREATE THE INFRASTRUCTURE

1. Create A VPC And Networking Components

In this step, we will choose the primary CIDR block for the VPC, which will allow us to create an "N" quantity of subnets. In this example, we choose a class B CIDR block (172.16.0.0/16).

"VPC": {
"Type": "AWS::EC2::VPC",
"Properties": {
"CidrBlock": "172.16.0.0/16",
"EnableDnsHostnames" : true,
"EnableDnsSupport" : true,
"InstanceTenancy" : "default",
"Tags": [{
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "VPC", { "Ref": "Environment" }] ]}
}]
}
}

We will be created 3 subnets -1 public and 2 privates-: PrivateSubnetA (172.16.1.0/27), PrivateSubnetB (172.16.2.0/27), and PublicSubnet1 (172.16.3.0/27) and despite having created a class B primary CIDR block, the subnets only allow 30 host maximum with the netmask: 255.255.255.224.

"PrivateSubnetA": {
"Type": "AWS::EC2::Subnet",
"Properties": {
"AvailabilityZone": { "Fn::Select" : [ 0, { "Fn::GetAZs" : { "Ref" : "AWS::Region" } } ] },
"VpcId": { "Ref": "VPC" },
"CidrBlock": "172.16.1.0/27",
"Tags": [{
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "DB-PrivSubA", { "Ref": "Environment" } ] ]}
}]
}
},
"PrivateSubnetB": {
"Type": "AWS::EC2::Subnet",
"Properties": {
"AvailabilityZone": { "Fn::Select" : [ 1, { "Fn::GetAZs" : { "Ref" : "AWS::Region" } } ] },
"VpcId": { "Ref": "VPC" },
"CidrBlock": "172.16.2.0/27",
"Tags": [{
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "DB-PrivSubB", { "Ref": "Environment" } ] ]}
}]
}
},
"PublicSubnet1": {
"Type": "AWS::EC2::Subnet",
"Properties": {
"AvailabilityZone": { "Fn::Select" : [ 0, { "Fn::GetAZs" : { "Ref" : "AWS::Region" } } ] },
"VpcId": { "Ref": "VPC" },
"CidrBlock": "172.16.3.0/27",
"Tags": [{
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "DB-PublicSubE", { "Ref": "Environment" } ] ]}
}]
}
}

To have internet access we will create and attach an internet gateway to the VPC.

"internetGW": {
"Type": "AWS::EC2::InternetGateway",
"Properties": {
"Tags": [{
"Key": "Name",
"Value": {"Fn::Join" : [" ",[ "InternetGW", { "Ref": "Environment" }] ]}
}]
}
},
"AttachGateway": {
"Type": "AWS::EC2::VPCGatewayAttachment",
"Properties": {
"VpcId": { "Ref": "VPC" },
"InternetGatewayId": { "Ref": "internetGW" }
}
}

Now, we will create the route tables. The public route table will have the internet gateway attached and the public subnet associated, the private route table will have the two private subnets associated.

"PrivateRouteTable": {
"Type": "AWS::EC2::RouteTable",
"Properties": {
"VpcId": { "Ref": "VPC" },
"Tags": [{
"Key": "Name",
"Value": {
"Fn::Join" : ["-",[ "PrivateRT", { "Ref": "Environment" }] ]
}
}]
}
},
"PublicRouteTable": {
"Type": "AWS::EC2::RouteTable",
"Properties": {
"VpcId": { "Ref": "VPC" },
"Tags": [{
"Key": "Name",
"Value": {
"Fn::Join" : ["-",[ "PublicRT", { "Ref": "Environment" }] ]
}
}]
}
}

2. Create Bastion Host And Its Security Group

The purpose of the Bastion Host is to restrict access to an application or database instance, as well as to provide a controlled entry to the private network that in this example will be the Aurora DB Cluster.

"BastionInstance": {
"Type" : "AWS::EC2::Instance",
"Properties" : {
"ImageId" : { "Ref": "AMIID" },
"InstanceType" : "t2.micro",
"KeyName" : { "Ref": "BastionKeyName" },
"NetworkInterfaces" : [ {
"AssociatePublicIpAddress" : true,
"DeleteOnTermination" : true,
"Description" : "Network interface for the bastion instance",
"DeviceIndex" : "0",
"GroupSet" : [ { "Ref": "SGWebInterface" }],
"SubnetId" : { "Ref": "PublicSubnet1" }
}],
"Tags" : [ {
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "BastionHost", { "Ref": "Environment" }] ]}
}],
"Tenancy" : "default",
"Volumes" : [ {
"Device" : "/dev/sdh",
"VolumeId" : { "Ref": "BastionVolume" }
}]
}
},
"SGWebInterface" : {
"Type" : "AWS::EC2::SecurityGroup",
"Properties" : {
"GroupDescription" : "Security group for bastion host",
"VpcId" : { "Ref": "VPC" },
"Tags" : [ {
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "SG-BASTION", { "Ref": "Environment" }] ]}
} ]
}
}

3. Create An Aurora DB Cluster And Its Security Group

We will create an Aurora DB Cluster that will consist of two DB instances (Primary and Replica instance) compatible with MySQL. Both instances will be separated into two Availability Zones and into private subnets. Consider the following properties in the cluster:

  • DBSubnetGroupName: This database subnet group is associated with the two private subnets defined in step 1.
  • Engine: Specify the compatibility version of MySQL. In this example, the value “aurora” is compatible with MySQL 5.6 versions.
  • EngineVersion: The version number of the database engine to use.
  • Port: The port in the DB cluster accept connections.
  • VpcSecurityGroupIds: The Security group(s) associated with the cluster. In this example, the Security Group associated with the cluster allows access to the bastion host Security Group.
"AuroraDBCluster": {
"Type" : "AWS::RDS::DBCluster",
"Properties" : {
"BackupRetentionPeriod" : 1,
"DatabaseName" : { "Ref": "DBName" },
"DBClusterIdentifier" : { "Ref": "DBClusterID" },
"DBSubnetGroupName" : { "Ref": "AuroraDBSubnetGroup" },
"DeletionProtection" : false,
"Engine" : "aurora",
"EngineVersion" : "5.6.10a",
"MasterUsername" : { "Ref": "DBUsername" },
"MasterUserPassword" : { "Ref": "DBPassword" },
"Port" : 3306,
"VpcSecurityGroupIds" : [ { "Ref": "SGDBInterface" }]
}
},
"AuroraMySQL1": {
"Type" : "AWS::RDS::DBInstance",
"Properties" : {
"AllowMajorVersionUpgrade" : false,
"AutoMinorVersionUpgrade" : true,
"DBInstanceClass" : { "Ref": "DBInstanceClass" },
"DBClusterIdentifier": { "Ref": "AuroraDBCluster" },
"DBInstanceIdentifier" : "instance1",
"DBSubnetGroupName" : { "Ref": "AuroraDBSubnetGroup" },
"Engine" : "aurora",
"EngineVersion" : "5.6.10a",
"PubliclyAccessible" : false,
"Tags" : [ {
"Key": "Environment",
"Value": { "Ref": "Environment" }
} ]
}
},
"AuroraMySQL2": {
"Type" : "AWS::RDS::DBInstance",
"DependsOn": [
"AuroraMySQL1"
],
"Properties" : {
"AllowMajorVersionUpgrade" : false,
"AutoMinorVersionUpgrade" : true,
"DBInstanceClass" : { "Ref": "DBInstanceClass" },
"DBClusterIdentifier": { "Ref": "AuroraDBCluster" },
"DBInstanceIdentifier" : "instance2",
"DBSubnetGroupName" : { "Ref": "AuroraDBSubnetGroup" },
"Engine" : "aurora",
"EngineVersion" : "5.6.10a",
"PubliclyAccessible" : false,
"Tags" : [ {
"Key": "Environment",
"Value": { "Ref": "Environment" }
} ]
}
},
"AuroraDBSubnetGroup": {
"Type": "AWS::RDS::DBSubnetGroup",
"Properties": {
"DBSubnetGroupDescription": {
"Fn::Join" : ["-",[ "DBSubnetGroup", { "Ref": "Environment" }] ]
},
"SubnetIds": [
{ "Ref": "PrivateSubnetA" },
{ "Ref": "PrivateSubnetB" }
],
"Tags": [ ]
}
},
"SGDBInterface" : {
"Type" : "AWS::EC2::SecurityGroup",
"Properties" : {
"GroupDescription" : "Security group for the database",
"VpcId" : { "Ref": "VPC" },
"Tags" : [ {
"Key": "Name",
"Value": {"Fn::Join" : ["-",[ "SG-DB", { "Ref": "Environment" }] ]}
} ]
}
}

4. Create The CloudFormation Stack

Copy the CloudFormation template “AuroraTemplate.json” from the following repository:

  • Link to the repository: https://bitbucket.org/mflemate/auroradb.git

Within the AWS console and in the region that you would like, go to the CloudFormation service and select the option to create a stack. Select the template previously downloaded and upload it to the console.

Enter the information of the following parameters correctly:

Note: Some of these parameters are automatically filled in, nevertheless you can change it according with your requirements.
  • Stack name: Enter a meaningful name for the stack. (for example: aurora-db-cluster)
  • AMIID: Select the AMI ID that selected in the prerequisite section
  • BastionKeyName: Select the key pair name that was set up in the prerequisite section
  • DBClusterID: Enter a meaningful name for the Aurora DB Cluster. (for example: myauroracluster)
  • DBInstanceClass: Optional. Enter a Database Instance Class if you want to change the default value (db.t3.medium)
  • DBName: Optional. Enter a Database name if you want to change the default value (mydb)
  • DBPassword: Enter Database password
  • DBUsername: Enter Database master username
  • (for example: admin)
  • Environment: Enter the environment stage (dev, qa, prod) of all the infrastructure for the Aurora DB cluster -dev is the default value-

To test the connection, tap on the “Test Connection” button and if you followed all steps correctly, wait for a successful response. The following message should be displayed:

Tap on the “OK” button to create a new connection, then double-click over it to open the Aurora MySQL DB.

Congratulations, now, you will be able to set up your Database.

CLEANUP PROCESS

For removing all the infrastructure created for the Aurora DB Cluster, just select the stack created previously, tap on “Delete” and wait around 15 minutes to be deleted.

CONCLUSION

In this article, I showed you how to deploy an Amazon Aurora MySQL DB Cluster based on some AWS security and high availability best practices using AWS CloudFormation. In addition, you can find important advantages in the setup of an Aurora DB Cluster such as high performance getting 5X the throughput of standard MySQL; high availability by its design to offer greater than 99.99% availability, replicating 6 copies of your data across 3 Availability Zones; highly secure, as, it provides multiple levels of security, as we made in the article with the network isolation using Amazon VPC.

Finally, as you can see, you can find many advantages with Amazon Aurora DB, I hope you find this article helpful.

Related Insights

1 2 3 … 36

We are results-driven with a focus on providing customer service excellence

IO Connect Services is here to help you by offering high-quality cloud technology solutions.
Connect with us
®2024 IO Connect Services
Privacy PolicyCookie Policy
magnifiercrossmenuchevron-down
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram